HK SP SV S08 12VDC

Magnetspule 12VDC für HK SV S08

The product image may differ

Nominal voltage +/- 10 %

12 V DC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A

Power input

22 W

Download PDF

Please choose a variant

Show table of articles

HK SP SV S08 12VDC HK SP SV S08 24VDC HK SP SV S08 230VAC

Our customer service: +49-421-48907-766

Product details for

HK SP SV S08 12VDC

Nominal voltage +/- 10 %

12 V DC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 24, HK SP 668 24, HK SP 668 24 A

Power input

22 W

Characteristics

Use

for valves HK SV S08

Customs tariff number

85059029

Product description

Notes

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.

Further information

A rectifier plug HK SP 669 has to be used for solenoid coils Type HK SP SV S08 230VAC.